MOUNTING

For optimum mounting of metallographic samples

LABTT boasts an extensive array of premium-grade consumables tailored for the meticulous preparation and in-depth analysis of metallographic samples. Each consumable undergoes rigorous testing and careful selection to ensure seamless compatibility and optimal performance with LABTT machines.

Light Curing Cold Mounting Press

LUM-6000


Dual wavelength combination:365+395;(395+450,365+450 optional)


Three brightness levels for each wavelength are set independently


Up and down,left and right,front and back and other six sides are surface light source and reflective film, light uniformity,high efficiency of curing light

Product Details

Automatic Cold Mounting Press

PVM-1000


Mounting under pressure


Pressure vessel: L300 × W400 × H300mm Main chassis: L320 × W300 × H230mm


Pressure vessel: 8Kg Main cabinet: 10Kg

Product Details

Cold Mounting Press

PVM-1S


Mounting under pressure


Pressure vessel: L300 × W400 × H300mm Main chassis: L320 × W300 × H230mm


Pressure vessel: 8Kg Main cabinet: 10Kg

Product Details

Vacuum Cold Mounting Press

VM-6000


Complete the entire mounting process with one click, including multiple vacuuming, maintaining vacuum, and releasing air cycles;


Process parameters such as vacuum degree, vacuum holding time, deflation, cycle times, and mounting completion reminder can be set;


999 sets of process parameters, set according to different materials and samples, password protected for easy access;

Product Details

Vacuum Cold Mounting Press

VM-3000S


Quickly achieve high vacuum (-60KPa)


Vacuum degree digital display and automatic control. After reaching the set vacuum level, the automatic vacuum pump stops automatically, and when the vacuum drops by a certain value, the vacuum pump starts automatically;


Large volume, transparent vacuum chamber;

Product Details

Metallographic Specimen Mounting Press

LHM-3000/3000D


When inserting the upper mold, there is no need to align it, simply press down on the upper mold, automatically align and enter the mold cavity.


Simultaneously embed four samples (dual station) or embed two samples (single station)


One click start automatically completes the sample preparation process, with human-machine interface and PLC control, making the system stable and reliable.

Product Details

Metallographic Specimen Mounting Press

LHM-2000W


The human-machine interface and PLC control make the system stable and reliable.


Adopt motor closed-loop control to apply pressure to the inlay material, ensuring stable and reliable pressure with low noise.


Efficient heating/cooling system, maximizing heat transfer and cooling, achieving rapid circulation. The preheating function maintains a constant standby temperature of the device, reduces heating time, and shortens sample preparation time.

Product Details
< 1 >